rubber

Hit:714 Tag:

TWIN SCREW EXTRUDERS FOR RUBBER DEVOLATILIZATION AND DEWATERING

Continuous, Efficient, Energy-saving and Environment

Description:

It is the one of the most important application in polymerization post-process that dewater the rubber by co-rotating twin screw extruder.

According to the features of different kinds of rubber, it may need to remove of the water, residual solvent, envocating agent, catalytic agent etc.  from the protomere surface or from its inside.  Continuous metering feedstock,multiple extrusion, interface update,evaporation, flashing,vacuum exhaust, granulation and other process engineering can be done at the same time by the extruder. The content of the volatile component of the finished rubber can reach high technic index. This extuder makes the conventional intermittent operation become continuous that a can save the engery,space, manpower, improve the operational environment and enhance the products stability.


TSC-115/150 ACM Dewatering, Straining, Pressing Line

TSC-115/150 ACM Dewatering, Straining, Pressing Line


Typical Application:

The twin screw extruder for rubber deep dewatering that Chuangbo produced can apply to lot's of rubbers: FKM(fluororubber),  IIR(buryl rubber),  CIIR(chlorinated buryl rubber),  BIIR(brominated buryl rubber),  SBR(styrene-butadiene rubber), IR(isoprene), CSM(chlorosulfonated polyethylene), ACM(acrylic), ECO(epichlorohydrin), ect. removing 30%-60% water;


Flow Chart:

Flow Chart


Main Specifications:

Main Specifications
TSH-115 CSM Dewatering Extruder

TSH-115 CSM Dewatering Extruder



Specifications of CO2 Foaming Extruder Specifications of CO2 Foaming Extruder Specifications of CO2 Foaming Extruder Specifications of CO2 Foaming Extruder
 

DEWATERED RUBBER

FKM ECO ACM ACM CSM


   43.9K